Injecting the closed roof cavities of your building Name: Date: This is a general listing and some of these areas may not apply. Please tell us the answers to only the questions that are relevant to your project. If you are giving us length and heights of walls or roof areas, please include information about window and door sizes. Which roof areas are to be insulated (All, just the slopes, flat caps, bay windows, etc.)? Is the installation to be done from the inside or the outside? Are the roof areas all open, closed cavity, or some of each? Is there a specification for the R-value of the roof, what R-value do you want? Are there high moisture levels and from what source? What are your plans for vapor control? (Polyethylene, dehumidification, ect.) See http://www.foam-tech.com/vaporbarrier/vaporbarrier.htm for more information Are there roof ventilation systems that need to be considered for the roof installation? See http://www.foam-tech.com/vent_basics/vent_basics.htm for more information Which areas are cathedral roofs, which are attics, etc.? How high is the top plate of the roof slope from the floor? What is the roof pitch in each area? Are [MK1]the slopes sheathed or open behind the knee-walls? Is access to all of the attics and knee-wall spaces available? In the top floor do you want to do the knee-walls and attic floor behind the walls or just the slopes? What is the framing size (Available cavity thickness)? What is the inside finish (lath and plaster, sheet rock, open, etc.)? Are there recessed lights and/or fans in the ceilings? Are there skylights in the roof? What are the sizes of the skylights? Page: 1 [MK1] Diagram of knee wall and roof sloap set up? - 2 - A Div. Of H.C.Fennell, Inc. Phone (802)222-7740 P.O. Box 65 Rt. 5 No. Thetford, VT 05054 Web: www.foam-tech.com Email: hfennell09@gmail.com FOAM-TECH Specializing in Superinsulation A Div. Of H.C.Fennell, Inc. Phone (802)222-7740 Fax (802) 333-4813 P.O. Box 65 Rt. 5 No. Thetford, VT 05054 Web: www.foam-tech.com Email: hfennell09@gmail.com